Code: C-1147
Description: Paper exit alignment plate retraction motor (M18) drive abnormality. The paper exit alignment plate home sensor (PS24) does not turn ON even after a specified period of time after M18 starts the home position search operation. Or, even after a specified period of time after M18 starts the operation, it does not stop. 35-1
Causes: Paper exit alignment plate retraction home sensor (PS24: FS-521) Paper exit alignment plate retraction motor (M18: FS-521) FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521)
Remedy: 1 Check the paper exit alignment retraction section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 7-M 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 4-G 6 Replace PS24. - 7 Replace M18. - 8 Replace FNSDB. - 9 Replace FNSCB.