Code: C-1225
Description: 3-hole/4-hole punch operation abnormality. The 3 holes/4 holes punch home sensor (PS9) does not turn OFF within a specified period of time after the 3 holes/4 holes punch home position return operation starts. Or, after the punch motor (M10) turns ON, the 3 holes/4 holes punch home sensor (PS9) does not turn OFF. 33-0
Causes: 3 holes/4 holes punch home sensor (PS9: FD-503) Punch motor (M10: FD-503) Punch drive board (PDB: FD-503)
Remedy: 1 Check the 3-hole/4-hole punch section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PDB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FD-503: 5-F 4 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FD-503: 5-E 5 Replace PS9. - 6 Replace M10. - 7 Replace PDB.