Code: C-1227
Description: Punch paper trailing edge operation abnormality. The punch registration home sensor (PS11) does not turn ON within a specified period of time after the punch registration claw home position return operation starts. Or, after the punch registration motor (M13) turns ON, the punch registration home sensor (PS11) does not turn OFF. 33-0
Causes: Punch registration home sensor (PS11: FD-503) Punch registration motor (M13: FD-503) Punch drive board (PDB: FD-503)
Remedy: 1 Check the punch alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PDB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FD-503: 5-F 4 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FD-503: 5-E 5 Replace PS11. - 6 Replace M13. - 7 Replace PDB.