Code: C-1243
Description: Folding sub scan alignment exit motor (M8) The folding exit home sensor (PS24) does not turn ON even after a specified period of time after M8 starts the home position search operation. Or, even after a specified period of time after M8 starts to decelerate, it does not stop. 34-0/1/2/3
Causes: Folding exit home sensor (PS24: SD-506) Folding sub scan alignment exit motor (M8: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the folding sub scan alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 10-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 14-D 6 Replace PS24. - 7 Replace M8. - 8 Replace SDDB. - 9 Replace SDCB.