Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1247 — Konica-Minolta bizhub Pro 1051

Code: C-1247

Description: Bundle registration motor (M12) drive abnormality. The bundle registration home sensor (PS34) does not turn ON even after a specified period of time after M12 starts the home position search operation. Or, even after a specified period of time after M12 starts the operation, it does not stop. 34-0/1/3
Causes: Bundle registration home sensor (PS34: SD-506) Bundle registration motor (M12: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle registration section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 27-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 21-D 6 Replace PS34. - 7 Replace M12. - 8 Replace SDDB. - 9 Replace SDCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1051

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie