Code: C-1251
Description: Saddle stitching alignment motor /Lt (M16) drive abnormality. The saddle stitching alignment home sensor /Lt (PS29) does not turn ON even after a specified period of time after M16 starts the home position search operation. Or, even after a specified period of time after M16 starts the operation, it does not stop. 34-0/1/3
Causes: Saddle stitching alignment home sensor /Lt (PS29: SD-506) Saddle stitching alignment motor /Lt (M16: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the saddle stitching alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 15-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 17-D 6 Replace PS29. - 7 Replace M16. - 8 Replace SDDB. - 9 Replace SDCB.