Code: C-1258
Description: Bundle press movement motor (M23) drive abnormality. The bundle press home sensor (PS37) does not turn ON even after a specified period of time after M23 starts the home position search operation. Or, even after a specified period of time after M23 starts the operation, it does not stop. 34-0/1/3
Causes: Bundle press home sensor (PS37: SD-506) Bundle press lower limit sensor (PS47: SD-506) Bundle press motor (M23: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle press section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 20-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 23-D 6 Replace PS37 or PS47. - 7 Replace M23. - 8 Replace SDDB. - 9 Replace SDCB.