Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1264 — Konica-Minolta bizhub Pro 1051

Code: C-1264

Description: Trimmer press motor (M32) drive abnormality. Or, even after a specified period of time after M32 starts the operation, it does not stop. 34-3
Causes: Trimmer press upper limit sensor (PS52: SD-506) Trimmer press home sensor (PS53: SD-506) Trimmer press motor (M32: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the trimmer press section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 22-R 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 23-R 6 Replace PS52 or PS53. - 7 Replace M32. - 8 Replace SDDB. - 9 Replace SDCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1051

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie