Code: C-1265
Description: Bundle arm assist motor (M26) drive abnormality. Or, even after a specified period of time after M26 starts the operation, it does not stop. 34-0/1/3
Causes: Bundle arm assist home sensor (PS38: SD-506) Bundle arm assist upper limit sensor (PS39: SD- 506) Bundle arm assist motor (M26: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle arm assist section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 16-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 17-D 6 Replace PS38 or PS39. - 7 Replace M26. - 8 Replace SDDB. - 9 Replace SDCB.