Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1281 — Konica-Minolta bizhub Pro 1051

Code: C-1281

Description: FD alignment motor (M3) drive abnormality. The FD alignment home sensor (PS3) does not turn ON even after a specified period of time after M3 starts the home position search operation. Or, even after a specified period of time after M3 starts the operation, it does not stop.
Causes: FD alignment home sensor (PS3: RU-506) FD alignment motor (M3: RU-506) RU control board (RUCB: RU-506)
Remedy: 1 Check the FD alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between RUCB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. RU-506: 1-B 4 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. RU-506: 5-B 5 Replace PS3. - 6 Replace M3. - 7 Replace RUCB

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1051

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie