Code: C-2103
Description: Charger cleaning motor (M23) drive abnormality. A motor lock signal is detected while moving from the charge cleaning limit sensor (PS27) side to the charge cleaning home sensor (PS26) side, and after a retry operation, a fifth motor lock signal is detected.
Causes: Charger cleaning motor (M23) Printer control board (PRCB)
Remedy: 1 Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 16-F 3 Replace M23. - 4 Replace PRCB.