Code: C-2215
Description: Hopper toner remaining sensor /2 (PS33) abnormality. When the toner is supplied for 8minutes, it is found that the toner remaining sensor /1 (PS32) does not turn ON and the PS33 turns OFF for the last 15seconds in succession.
Causes: Hopper toner remaining sensor /1 (PS32) Hopper toner remaining sensor /2 (PS33) Printer control board (PRCB)
Remedy: 1 Check the hopper section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and the sensor, and repair it if any abnormality. - 3 Check the sensor, and repair/replace it if any abnormality. 4-M 4 Replace PS32. - 5 Replace PS33. - 6 Replace PRCB.