Code: C-2230
Description: Waste toner box swing motor (M19) drive abnormality. The waste toner box swing sensor (PS15) ON or OFF is not detected twice in succession within a specified period of time after M19 turns ON.
Causes: Waste toner box swing sensor (PS15) Waste toner box swing motor (M19) Printer control board (PRCB)
Remedy: 1 Check the waste toner box swing section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and motor/sensor, and repair it if any abnormality. - 3 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. 2-M 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 2-M 5 Replace PS15. - 6 Replace M19. - 7 Replace PRCB.