Code: C-2233
Description: Waste toner box swing motor (M19) rotation abnormality. The M19EM error detection signal is not detected twice in succession within a specified period of time after M19 was turned ON.
Causes: Waste toner box swing motor (M19) Printer control board (PRCB)
Remedy: 1 Check the waste toner box swing section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 2-M 4 Replace M19. - 5 Replace PRCB.