Code: C-2808
Description: Dot diameter correction abnormality. While in the dot diameter correction, the correction is terminated with an abnormal value.
Causes: Drum potential sensor (DPS) Drum potential sensor board (DPSB) Image processing board (IPB) Printer control board (PRCB) Overall control board (OACB)
Remedy: 1 Check DPS, and clean/repair it if there is sensor dirt or any abnormality. 17-F 2 Check the connector connection and the wiring between PRCB and OACB, and repair it if any abnormality. - 3 Check the connector connection and the wiring between OACB and IPB, and repair it if any abnormality. - 4 Replace DPS. - 5 Replace DPSB. - 6 Replace IPB. - 7 Replace PRCB.