Code: C-2811
Description: Drum potential sensor (DPS) data abnormality. While in the drum potential correction, no convergence is obtained even after correction is made more than 10 times. When this condition is detected 5 times in succession, the error code is displayed.
Causes: Drum potential sensor (DPS) Drum potential sensor board (DPSB) Printer control board (PRCB)
Remedy: 1 Check DPS, and clean/repair it if there is sensor dirt or any abnormality. 17-F 2 Check the connector connection and the wiring between PRCB and DPS, and repair it if any abnormality. - 3 Replace DPS. - 4 Replace DPSB. - 5 Replace PRCB.