Code: C-6704
Description: Scanner time out. • While in the image read, the compression processing from the scanner into the memory does not terminate within a specified period of time. • The development from the scanner into the page memory does not terminate within a specified period of time. • The SVV is not detected within a specified period of time.
Causes: Image processing board (IPB) Overall control board (OACB) Printer control board (PRCB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Check the connector connection and the wiring between IPB and OACB, and repair it if any abnormality. - 3 Check the connector connection and the wiring between OACB and PRCB, and repair it if any abnormality. - 4 Replace IPB. - 5 Replace OACB. - 6 Replace PRCB.