Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-6721 — Konica-Minolta bizhub Pro 1051

Code: C-6721

Description: AGC retry. The AGC is retried due to the decreased light volume of the exposure lamp. However, no error occurs.
Causes: Exposure lamp (L4) L4 inverter (L4_INVB) Scanner drive board (SDB) CCD board (CCDB)
Remedy: 1 Check the reading section, and repair it if any abnormality such as cover off. - 2 Check the connector connection and the wiring between IPB and CCDB, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDB and L4_INVB/ between L4_INVB and L4, and repair it if any abnormality. 2-F 4 When L4 is high-light intensity, low-light intensity or does not light, replace L4. - 5 When L4 is high-light intensity, low-light intensity or does not light after replacing L4, replace L4_INVB. - 6 Replace CCDB. -

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1051

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie