Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1144 — Konica-Minolta bizhub Pro 1200

Code: C-1144

Description: Paper exit alignment motor /Fr (M15) abnormality The paper exit alignment plate home sensor /Fr (PS18) does not turn ON within a specified period of time after M15 starts the home position search operation. Or, even after a specified period of time after M15 starts the operation, it does not stop. 35-1
Causes: Paper exit alignment plate home sensor /Fr (PS18: FS-521) Paper exit alignment motor /Fr (M15: FS-521) FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521)
Remedy: 1 Check the front side of the paper exit alignment section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 8-G 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 7-G 6 Replace PS18. - 7 Replace M15. - 8 Replace FNSDB. - 9 Replace FNSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie