Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1225 — Konica-Minolta bizhub Pro 1200

Code: C-1225

Description: 3-hole/4-hole punch operation abnormality. The 3 holes/4 holes punch home sensor (PS9) does not turn OFF within a specified period of time after the 3 holes/4 holes punch home position return operation starts. Or, after the punch motor (M10) turns ON, the 3 holes/4 holes punch home sensor (PS9) does not turn OFF. 33-0
Causes: 3 holes/4 holes punch home sensor (PS9: FD-503) Punch motor (M10: FD-503) Punch drive board (PDB: FD-503)
Remedy: 1 Check the 3-hole/4-hole punch section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PDB and motor/sensor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FD-503: 5-F 4 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FD-503: 5-E 5 Replace PS9. - 6 Replace M10. - 7 Replace PDB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie