Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1245 — Konica-Minolta bizhub Pro 1200

Code: C-1245

Description: Bundle arm motor (M10) drive abnormality. The bundle arm home sensor (PS32) does not turn ON even after a specified period of time after M10 starts the home position search operation. Or, even after a specified period of time after M10 starts the operation, it does not stop. Bundle arm motor (M10) 34-0/1/3
Causes: Bundle arm home sensor (PS32: SD-506) Bundle arm motor (M10: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle arm section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 19-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 17-D 6 Replace PS32. - 7 Replace M10. - 8 Replace SDDB. - 9 Replace SDCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie