Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1258 — Konica-Minolta bizhub Pro 1200

Code: C-1258

Description: Bundle press movement motor (M23) drive abnormality. The bundle press home sensor (PS37) does not turn ON even after a specified period of time after M23 starts the home position search operation. Or, even after a specified period of time after M23 starts the operation, it does not stop. 34-0/1/3
Causes: Bundle press home sensor (PS37: SD-506) Bundle press lower limit sensor (PS47: SD-506) Bundle press motor (M23: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle press section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 20-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 23-D 6 Replace PS37 or PS47. - 7 Replace M23. - 8 Replace SDDB. - 9 Replace SDCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie