Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1265 — Konica-Minolta bizhub Pro 1200

Code: C-1265

Description: Bundle arm assist motor (M26) drive abnormality. Or, even after a specified period of time after M26 starts the operation, it does not stop. 34-0/1/3
Causes: Bundle arm assist home sensor (PS38: SD-506) Bundle arm assist upper limit sensor (PS39: SD- 506) Bundle arm assist motor (M26: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
Remedy: 1 Check the bundle arm assist section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 16-D 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 17-D 6 Replace PS38 or PS39. - 7 Replace M26. - 8 Replace SDDB. - 9 Replace SDCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie