Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1566 — Konica-Minolta bizhub Pro 1200

Code: C-1566

Description: PB-503: Operation abnormality of the relay conveyance exit motor (M91) An error detection signal is detected continuously while the M91 is driving. 35-4
Causes: Relay conveyance exit motor (M91: PB-503) PB control board (PBCB: PB-503) PB drive board /1 (PBDB1: PB-503) PB drive board /2 (PBDB2: PB-503)
Remedy: 1 Check the relay conveyance paper exit section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PBDB1 and the motor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between PBDB2 and the motor, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. PB-503: 26-W 5 Replace M91. - 6 Replace PBDB2. - 7 Replace PBDB1. - 8 Replace PBCB. -

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie