Code: C-2232
Description: De-curler motor (M32) power abnormality. While M32 is rotating, the M32EM error detection signal is detected. At this time, an error detection signal (blowout of ICP) is detected, and the main door detection is Close.
Causes: De-curler motor (M32) ADU drive board (ADUDB)
Remedy: 1 Check the connector connection and the wiring between ADUDB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 15-O 3 Replace M32 and ADUDB at a time.