Code: C-2236
Description: Transfer belt pressure release motor (M26) power abnormality. While M26 is rotating, the M26EM error detection signal is detected. At this time, an error detection signal (blowout of ICP) is detected, and the main door detection is Close.
Causes: Transfer belt pressure release motor (M26) ADU drive board (ADUDB)
Remedy: 1 Check the connector connection and the wiring between ADUDB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 21-L 3 Replace M26 and ADUDB at a time.