Code: C-6102
Description: Scanner motor (M27) power abnormality. The scanner home sensor (PS51) or the APS sensor /1 (PS52) does not turn ON within a specified period of time after the home position search is started. At this time, 24V is normal, but an error detection signal (blowout of a fuse) is detected.
Causes: Scanner motor (M27) Scanner drive board (SDB)
Remedy: 1 Check the connector connection and the wiring between SDB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 1-F 3 Replace M27 and SDB at a time.