Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-0114 — Konica-Minolta bizhub Pro 1200P

Code: C-0114

Description: Abnormality 2 of the SD/CL_24V power for the printer control board (PRCB) tray. When the error detection signal of the PRCB tray solenoid/clutch ICP blowout is detected but no 24V cut off is detected at the start.
Causes: Paper feed clutch /1 (CL4) Separation clutch /1 (CL5) Paper feed clutch /2 (CL6) Separation clutch /2 (CL7) Pick-up solenoid /1 (SD3) Pick-up solenoid /2 (SD4) Printer control board (PRCB)
Remedy: 1 Check the connector connection and the wiring related to DC24V between PRCB and clutch/solenoid, and repair it if any abnormality. - 2 Check the drive and the coupling of the clutch and the solenoid, repair it if any abnormality, and then replace PRCB. 5-F, 8-F 3 Replace PRCB. - 4 Replace the clutch, the solenoid and PRCB at a time.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200P

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie