Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1146 — Konica-Minolta bizhub Pro 1200P

Code: C-1146

Description: Bypass roller release motor (M12) drive abnormality. The bypass roller release home sensor (PS13) does not turn ON even after a specified period of time after M12 starts the home position search operation. Or, even after a specified period of time after M12 starts the operation, it does not stop. 35-1
Causes: Bypass roller release home sensor (PS13: FS-521) Bypass roller release motor (M12: FS-521) FNS drive board (FNSDB: FS-521) FNS control board (FNSCB: FS-521)
Remedy: 1 Check the bypass roller section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between FNSDB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between FNSDB and FNSCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. FS-521: 5-C 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. FS-521: 4-B 6 Replace PS13. - 7 Replace M12. - 8 Replace FNSDB. - 9 Replace FNSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200P

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie