Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1518 — Konica-Minolta bizhub Pro 1200P

Code: C-1518

Description: Pellet supply arm motor (M34) drive abnormality. The movement of the pellet supply arm has not been completed within a specified period of time after M34 turns ON. 35-4
Causes: Pellet supply arm motor (M34: PB-502, PB-503) PB drive board (PBDB: PB-502) PB drive board /1 (PBDB1: PB-503) PB control board (PBCB: PB-502, PB-503)
Remedy: 1 Check the pellet supply section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. PB-502: 10-D PB-503: 10-D 5 Replace M34. - 6 Replace PBDB (PB-502), PBDB1 (PB-503). - 7 Replace PBCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200P

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie