Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-2103 — Konica-Minolta bizhub Pro 1200P

Code: C-2103

Description: Charger cleaning motor (M23) drive abnormality. A motor lock signal is detected while moving from the charge cleaning limit sensor (PS27) side to the charge cleaning home sensor (PS26) side, and after a retry operation, a fifth motor lock signal is detected.
Causes: Charger cleaning motor (M23) Printer control board (PRCB)
Remedy: 1 Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality. - 2 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 16-F 3 Replace M23. - 4 Replace PRCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200P

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie