Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-2810 — Konica-Minolta bizhub Pro 1200P

Code: C-2810

Description: Drum potential sensor (DPS) output abnormality 3. While in the drum potential correction, a patch for control is not output with the V1 getting to more than 350V. When this condition is detected 5 times in succession, the error code is displayed.
Causes: Drum potential sensor (DPS) Drum potential sensor board (DPSB) Printer control board (PRCB)
Remedy: 1 Check DPS, and clean/repair it if there is sensor dirt or any abnormality. 17-F 2 Check the connector connection and the wiring between PRCB and DPS, and repair it if any abnormality. - 3 Replace DPS. - 4 Replace DPSB. - 5 Replace PRCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 1200P

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie