Code: C-6103
Description: Scanner motor (M27) movement time abnormality. The scanner home sensor (PS51) or the APS sensor /1 (PS52) does not turn ON within a specified period of time after the home position search is started. At this time, an error detection signal (blowout of a fuse/24V cut off) of M27 is not detected.
Causes: Scanner home sensor (PS51) APS sensor /1 (PS52) Scanner motor (M27) Scanner drive board (SDB)
Remedy: 1 Check the scanner drive section, and repair it if any abnormality. - 2 Check the connector connection and the wiring between SDB and motor/sensor, and repair it if any abnormality. - 3 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. 2-F 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. 1-F 5 Replace PS51 and PS52. - 6 Replace M27. - 7 Replace SDB.