Mã lỗi SC18-30 — Konica-Minolta bizhub Pro 920
Code:
SC18-30
Description: The locking of the paper lift motor /3 (M21) is detected. When M21 is ON, an error detection signal of the M21 is detected.
Causes: Paper lift motor /3 (M21) Printer control board (PRCB) Upper limit sensor /3 (PS22) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 3
← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 920