Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC21-04 — Konica-Minolta bizhub Pro 920

Code: SC21-04

Description: • It is checked that the operations of the transfer/separation cleaning motor (M18) are over. When the transfer/separation cleaning home sensor (PS11) is OFF with the main power switch (SW1) ON, PS11 does not turn ON within a specified period of time after the M18 turns ON for a home position research operation (return operation). At this time, an error detection signal (blowout of ICP) is not detected. • PS11 does not turn OFF within a specified period of time after the reverse operation (return operation) is started. At this time, an error detection signal (blowout of ICP) is not detected. • It is checked that the operations of the M18 are over. The transfer/separation cleaning limit sensor (PS12) does not turn ON within a specified period of time after the reverse operation (return operation) is started for detection of PS11 being OFF. Or, PS11 does not turn ON within a specified period of time after PS12 turns ON. At this time, an error detection signal (blowout of ICP) is not detected.
Causes: Transfer/separation cleaning motor (M18) ADU drive board (ADUDB) Transfer/separation cleaning home sensor (PS11) Transfer/separation cleaning limit sensor (PS12) Wiring harness broken Loose connection

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 920

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie