Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC29-07 — Konica-Minolta bizhub Pro 920

Code: SC29-07

Description: The dirt correction of the sensor is not completed. While in the dot diameter correction, the dirt correction of the PGC sensor (PGCS) is not sufficient. When SC29-4 or SC29-7 is detected ten times in succession, this error code is displayed.
Causes: Toner control sensor board (TCSB) Printer control board (PRCB) Developing motor (M3) Write unit Overall control board (OACB)

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 920

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie