Code: C-1105
Description: The paper exit opening unit does not get to the specified opening position within a specified period of time after the paper exit opening motor (M10) starts operations.
Causes: • FNS control board (FNSCB) • Paper exit opening motor (M10) • Paper exit home sensor (PS13) DIPSW35-1
Remedy: 1. Check the paper exit opening section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between FNSCB and motor/sensor, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 3-F) 4. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 4-B) 5. Replace PS13. 6. Replace M10. 7. Replace FNSCB.