Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1180 — Konica-Minolta bizhub Pro 951

Code: C-1180

Description: The alignment home sensor (PS106) does not turn ON within a specified period of time after the saddle stitching alignment motor (M104) turns ON.
Causes: • FNS control board (FNSCB) • SD control board (SDCB) • Saddle stitching alignment motor (M104) • Alignment home sensor (PS106) DIPSW47-2
Remedy: 1. Check the connector connection and the wiring between SDCB and motor/sensor, and repair it if any abnormality. 2. Check the connector connection and the wiring between FNSCB and SDCB, and repair it if any abnormality. 3. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: SD-510: 3-G) 4. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: SD-510: 4-B) 5. Replace PS106. 6. Replace M104. 7. Replace SDCB. 8. Replace FNSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 951

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie