Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C-1537 — Konica-Minolta bizhub Pro 951

Code: C-1537

Description: The tray moving up process has not been completed within a specified period of time after the cover paper tray lift motor (M73) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper tray lift motor (M73) DIPSW7-5
Remedy: 1. Check the cover paper tray section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: PB-503: 19-D) 5. Replace M73. 6. Replace PBDB1. 7. Replace PBCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub Pro 951

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie