Code: C0510
Description: Abnormally low fusing temperature
The surface temperature of the Upper Fusing Roller remains less than 135°C for a continuous 1-sec. or more period after the copier has completed warming up.
The surface temperature of the Upper Fusing Roller remains less than 135°C for a continuous 1-sec. or more period after the copier has completed warming up.
Remedy: 1 Heater Lamp turns ON when the Power Switch is turned ON YES Correct Thermistor for mounting position and/or clean. NO Make checks from step 3 onward. 2 Thermistor operation: resistance across CN14- 2 and 3 on Fusing Unit side is infinite, as measured with CN14 (4P) disconnected. YES Change Thermistor. NO Change Master Board. 3 Fusing Thermoswitch and Heater Lamp operation: have continuity across CN5-1 and 2 on the Fusing Unit side with CN5 (2P) disconnected YES Change DC Power Supply 2. NO Change Fusing Thermoswitch and Heater Lamp. 4 The voltage across PJ7A-1 on the Master Board and GND is DC0V (Heater Lamp ON) and DC24V (Heater Lamp OFF) when the Power Switch is turned ON. YES Change Master Board. 5 The voltage across PJ4PU2-4 on DC Power Supply 2 and GND is DC0V (Heater Lamp ON) and DC24V (Heater Lamp OFF) when the Power Switch is turned ON. YES Change DC Power Supply 2. NO Plug in CN27 and CN14.