Code: C0520
Description: Abnormally high fusing temperature
The surface temperature of the Upper Fusing Roller remains 230°C or more for a continuous 1-sec. or more period after the copier has completed warming up.
The surface temperature of the Upper Fusing Roller remains 230°C or more for a continuous 1-sec. or more period after the copier has completed warming up.
Remedy: 1 The Heater Lamp remains lit after the copier has warmed up. YES Make checks from step 2 onward. NO Make checks from step 3 onward. 2 The voltage across PJ7A-1 and GND remains DC0V after the copier has warmed up. YES Change Master Board. NO Change DC Power Supply 2. 3 The circuit across CN14-2 and 3 on the Fusing Unit side is shorted with CN14 (4P) disconnected. YES Change Thermistor. NO Change Master Board.