Code: C0F31
Description: ATDC Sensor adjustment failure
The ATDC Sensor output does not fall within the target range (2.46 to 2.57V) in the F8 mode.
The ATDC Sensor output does not fall within the target range (2.46 to 2.57V) in the F8 mode.
Remedy: 1 PJ10 and CN39 connectors on the Master Board are properly connected NO Connect. 2 ATDC Sensor operation: the voltage across PJ10A-6 on the Master Board and GND varies in the range between DC0.5V and DC4.5V while the Upper Drive Motor is energized. YES Change Master Board. NO Change ATDC Sensor.