Code: C1300
Description: Polygon Motor’s failure to turn
• The Lock signal remains HIGH 5 sec. after the motor has started turning. • The Lock signal does not go LOW even once for a 1sec. period at any time 1 sec. after the motor has started turning. • The Lock signal remains HIGH for a continuous 0.5sec. or more period while the motor is energized.
• The Lock signal remains HIGH 5 sec. after the motor has started turning. • The Lock signal does not go LOW even once for a 1sec. period at any time 1 sec. after the motor has started turning. • The Lock signal remains HIGH for a continuous 0.5sec. or more period while the motor is energized.
Remedy: 1. Reset the malfunction. 2. If the malfunction is still detected, check the harness between, and PJ connections on, the PH Unit and Master Board. 3. If connections are okay, change the PH Unit and Master Board.