Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1300 — Konica-Minolta Di250

Code: C1300

Description: Polygon Motor malfunction
<Faulty start detection> • The Lock signal is not detected at any time during a given period of time 1 sec. after the Polygon Motor has been energized. <Faulty Lock signal detection> • No Lock signals are detected at any time during the 1-sec. period which starts 1 sec. after the first Lock. <Out-of-timing Lock detection> • The Lock signal is not detected for a continuous 0.5sec. period while the Polygon Motor is in the stabilized turning state. <Abnormal Lock detection> • The Lock signal remains ON for a continuous 5-sec. period while the Polygon Motor remains deenergized.
Remedy: 1. Reset the malfunction and turn OFF and ON the Power Switch. 2. Check the connection between PH Assy and Master Board. 3. Change PH Assy. Change Master Board.

← Xem tất cả mã lỗi Konica-Minolta Di250

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie