Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0200 — Konica-Minolta Di30

Code: C0200

Description: PC Drum Charge Corona Faulty charging, corona wire snapping/shorting, grid mesh shorting
• The SCD Malfunction signal is detected for 1 sec. or more when the PC Drum Charge Corona output is turned ON. • The PC Drum Charge Corona is not installed properly.
Remedy: Check 1. Is power being supplied from PWB-A to HV1? • Once the Power Switch has been turned ON, there should be DC24V developing across pins 1 and 2 (GND) of PJ5A. Check 2. Is the PC Drum Charge Corona ON signal being output from PWB-A to HV1? • When the PC Drum Charge Corona output is ON, there should be DC0V developing across pins 3 and 2 (GND) of PJ5A on PWB-A. (When the output is OFF, there should be a voltage of approx. DC12V.) Check 3. Is the PC Drum Charge Corona SCD signal being output from HV1 to PWB-A? • When charge leak occurs, there should be DC0V across pins 12 and 2 (GND) of PJ5A on PWB-A. (The voltage should be DC5V under normal conditions.)

← Xem tất cả mã lỗi Konica-Minolta Di30

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie