Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0240 — Konica-Minolta Di30

Code: C0240

Description: Developing Bias Faulty bias, bias discharging/shorting
The SCD Malfunction signal is detected for 1 sec. or more when the Developing Bias output is turned ON.
Remedy: Check 1. Is power being supplied from PWB-A to HV1? • Once the Power Switch has been turned ON, there should be DC24V developing across pins 1 and 2 (GND) of PJ5A. Check 2. Is the Developing Bias ON signal being output from PWB-A to HV1? • When the developing bias output is ON, there should be DC0V developing across pins 8 and 2 (GND) of PJ5A on PWB-A. (When the output is OFF, there should be a voltage of approx. DC24V.) Check 3. Is the developing bias SCD signal being output from HV1 to PWB-A? • When bias leak occurs, there should be DC0V across pins 13 and 2 (GND) of PJ5A on PWB-A. (The voltage should be DC5V under normal conditions.)

← Xem tất cả mã lỗi Konica-Minolta Di30

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie