Code: C0650
Description: Scanner Drive Motor Faulty Scanner home position detection
The Scanner does not return to its home position.
The Scanner does not return to its home position.
Remedy: Check 1. Is power (DC24V/DC5V) being supplied to PWB-IE? • Once the Power Switch has been turned ON, there should be the following voltages across the respective pins of PJ2IE on PWB-IE: DC24V across pins 1 and 3 (GND) DC24V across pins 2 and 4 (GND) DC5V across pins 5 and 6 (GND) Check 2. Does PC6 detect the Scanner properly? • When the Scanner reaches PC6, it blocks PC6 (LOW) and DC0V should be developing across pins 12 and 11 (GND) of PJ3ID on PWB-ID. [The voltage becomes DC5V when PC6 is unblocked (HIGH).]