Code: C0E00
Description: Main Erase Lamp LA1 Lamp’s failure to turn ON, lamp out, lamp terminal/connector left disconnected
No current flows for 1 sec. or more after LA1 has been turned ON.
No current flows for 1 sec. or more after LA1 has been turned ON.
Remedy: Check 1. Is power (DC24V) being supplied from PWB-A to LA1? • Once the Power Switch has been turned ON, there should be DC24V across pin 4 of PJ7A on PWB-A and GND. Check 2. Is an LA1 Remote signal being output from PWB-A to LA1? • When LA1 is turned ON, there should be approx. DC1.2V across pin 5 of PJ7A on PWB-A and GND.