Code: C0F33
Description: ATDC adjustment failure
• In an F8 (ATDC control voltage automatic adjustment) operation, the adjustment of ATDC control voltage is not completed within 1 min. after the ATDC Sensor sampling. • In an F8 operation, the control voltage falls outside the range of 5.39 V to 8.15 V.
• In an F8 (ATDC control voltage automatic adjustment) operation, the adjustment of ATDC control voltage is not completed within 1 min. after the ATDC Sensor sampling. • In an F8 operation, the control voltage falls outside the range of 5.39 V to 8.15 V.
Remedy: 1 ATDC Sensor and Master Board are connected properly. NO Correct connection. 2 The voltage across PJ6PU1-5 on Power Supply Unit and GND is DC5 V. YES Change I/C. Change Master Board. NO Change Power Supply Unit.