Code: C13F0
Description: HSYNC detection failure
• The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
• The SOS falling edge is not detected for 0.2 sec. or more after the Polygon Motor has been energized and laser output started. • No SOS falling edges are detected while VIA remains ON.
Remedy: 1. Reset the malfunction and turn OFF and ON the Power Switch. 2. Check the connection between PH Assy and Master Board. 3. Change PH Assy. Change Master Board.